New Machinery - Maxima MC 115
The construction of the paper guillotines MAXIMA MC 115 is based on mechanical parts which were already verified and proved by the foregoing types. It is outstanding by its rugged construction, reliability, precision of the cut, easy operation, high operational safety and efficient design. The guillotines are specified for cutting of the paper, papercard and paperboard, as well as other technical materials such as veneer, leather, cork, rubber and plastic foils.
Technical advantages consist above all in the high operating productivity, easy operation and the low level of the noise.
Operation safety
• Electromagnetic single - plate clutch with
a spring brake for the knife drive
• Mechanical locking of the knife
in the upper dead position
• Separate hydraulic circuits for cut-line
indication and for the preclamping
• Two - hand engagement with simultaneous
control and time synchronisation to 0.5 sec.max
• 24 V controlling circuits for cut, back gauge feed and for lighting
• Covering of all dangerous places
• Automatic overlapping of the knife by the clamp in every position
• Reduced preclamping force
• Photoelectric safety barrier on the base of the infrared sensing field (optional)
All types of the machines are equipped with the air cushion for easy manipulation of the cut material. Even the reinforced type MC 115 BP are equipped with the digital indication and setting of the measure with the possibility of automatically cutting of the strips. All the types are equipped with the reinforced mechanical parts.
Type MC 115 PS is equipped with a control system which includes a free programmable automatic device with monochromatically display 8 x 40 types and with the possibility of creating of 999 cutting programmes with 10.000 cutting steps. The machine is working in the semi - automatic mode with the possibility of the creating and storing of the cutting programmes for repeated jobs.
The top of the range model MC 115 TSE (Colour touch-screen), is able to create 800 programmes in 4 sections and also has the facility for fully automatic, programmed cutting of standard sizes.
The new large-size TFT colour touch-screen ensures enhanced operator comfort through clearly readable display, thus increasing the operator's productivity. The new control programme underlying the touch-screen provides you with a powerful tool for high cutting productivity and quality. The arrangement of control functions in all screens is clear and logical, making the control of the programme very intuitive and easily accessible to the operator through the interactive control system.
SW features
Entering dimensions in cm, mm, inches (in fractions or decimal notation). Entering programme name using an alpha-numeric keyboard - up to 16 characters. 800 programmes in 4 blocks.
Functions - programming clamping pressure for different cutting cycles, clamping without cutting, programmable clamping without cutting, communication in 8 languages (Czech, English, Russian, German, Spanish, French, Polish, Hungarian), machine lubrication prompts, automated programming through cutting, programme protection by password, immediate cutting cycle interruption - switching to manual mode and return, visualisation of cut lines in graphic mode using simulation. Operator specific programmes - e.g. different programmes for morning and afternoon shifts.
Auto-diagnostic features in the 'Service' mode, indicating machine status for the prevention of operator errors. 'Help' function with operating prompts and instructions. Automated creation of cutting programmes using pre-defined A0-B5 or customized formats and many other features.
SW features
• Reciprocating ball bearing drive for the backgauge leadscrew
• Stainless steel plated table
• Infra-red light barrier guard (where not included in standard specification)
• Wedge shaped clamp plate for cutting woven materials
• Flexible clamp plate for cutting un-even materials
• Cutting knives with edge angle of 16 or 20 degree bevels
• Pile lifts, joggers and other accessories from f. Knorr
| STANDARD/ OPTIONAL EQUIPMENT | BP | PS | TSE |
| Digital measure indicator | s | s | s |
| Strips cutting facility | s | s | s |
| Optical cut line indication | s | s | s |
| Semi-automatic cut | s | s | s |
| 999 programs / 10.000 steps | s | ||
| Cut to mark | s | ||
| Pressing without cut | s | ||
| Programable pressing without cut | s | ||
| Programme protection by password | s | ||
| Visualisation of cut lines in graphic mode using simulation | s | ||
| Machine lubrication prompts | s | ||
| Menu supported programming | s | ||
| Fully automatic programming | s | ||
| Monochrome display (8x40) | s | ||
| Colour touch screen TFT display 11" monitor | s | ||
| Two-hand operation with simultaneous control | s | s | s |
| Mechanical locking of the knife in the TDC rest position | s | s | s |
| Automatic shielding of the knife by the clamp in every position | s | s | s |
| Air cushion table complete with compressor | s | s | s |
| Reinforced mechanical parts | s | s | s |
| Reciprocating ball leadscrew bearing | o | o | o |
| Duplicated hydraulic system | s | ||
| Precision ground table surfaces | s | s | o |
| Stainless steel plated table | o | o | s |
| Infra-red ligth barrier guard | o | o | s |
| European Certification CE + GS | s | ||
| Standard = s / Optional = o |
Basic technical specifications
| Cutting length | 1 150 mm |
| Max.back gauge traverse | 1 150 mm |
| Clamping stroke | 130 mm |
| Minim.off-cut (manual feed) | 25 mm |
| Minim.off-cut (mechan.feed) | 30 mm |
| Weight | 3 250 kg |
| Length/width/height | 2795 x 2860 x 1535 |
| El.imput power | 3 x 400V/ 5,5 kW |
Remark : The machines are delivered from the factory in a wooden case with dimensions 310 cm (122") x 160 cm (63") x 190 cm (75").They are packed dismantled into two main parts - The frame 290 cm (114.2") x 90 cm (35.4") x 160 cm (63") - weight 2500 kg (5475LB) and the table 115cm (45.3") x 270 cm (106.3") - weight 750 kg (1643LB). Gross weight 3700 kg (8103LB).
Specifications are subject to change without any prior notices.