New Machinery - Maxima MC 80 TH
The MAXIMA MC 80 TH paper cutter is another product from a new range of hydraulic guillotines featuring an advanced overall design concept for increased efficiency of all critical components. For example, the power transmission for the cutting mechanism is via a linear hydraulic motor. The machine is designed for cutting paper stacks of up to 800mm wide and 140mm high. The robust construction of the MAXIMA MC 80 TH, however, facilitates a wide variety of cutting applications, including paper, card, board, rubber, cork and similar materials up to a strength of 45N/mm over the full cutting length.
The Paper Guillotin MAXIMA MC 80 TH is determineted especially for the working in the printing houses equipped by offset machines up to size A2. The machine can be also used in work with rubber, venner, metal and plastic foils, etc.
Standard Features
Safety features
• Infrared light barrier guard.
• Low pressure pre-clamping/gauging system.
• Rear table without lead-screw slot
for backgauge drive
• Fixed guarding to all danger areas
• Automatic return of the knife from any position.
• Positive mechanical locking of the knife-beam in the top rest position,
with cross-monitoring.
• Twin push-button control of the cutting cycle with timed synchronisation (0.5 s max.).
• 24v control circuits for clamp & knife operation, backgauge drive and lighting.
• Fully compliant with European CE safety requirements.
Mechanical part
• Quiet operation.
• High precision.
• Smooth, vibration-free cutting.
• Hydraulic clamping and cutting operation with adjustable pressure control.
• Overload protection.
• New linear hydraulic motor design concept for the cutting mechanism.
• Backgauge drive via lead screw located adjacent to the right-hand side of rear table.
• Servo control of backgauge drive.
• Stainless steel plated table.
• Air-cushion table.
Knife
• Simple knife-change and adjustment from the front.
• Protection of the knife during his replacement
• Knife protection during knife-change.
• Cutting cycle counter.
• Supplied with 2 high quality steel knives.
Control system and backgauge control system
• TFT touch screen
• Direct setting of cutting coordinates.
• Coordinate setting by +/- value.
• Measure display in metric [mm, cm] or imperia .
• Hand backgauge drive
• Stepping 0,1 mm
• Memory capacity for 4x 200 cutting programs with 250 cutting steps.
• Programing whilst cutting (cut to mark) facility.
• Easy selection and recall for regularly repeated cutting jobs.
• Strip-cutting feature, with or without intermediate cutting.
• Simple program editing.
• Material ejection (push-out) facility.
• Fast/Micro backward and forward drive speed ( max. 300mmm/s).
Electrical equipment
• 400V/50Hz 3 phase.
• Mains isolator switch.
• Hydraulic system motor switch.
• Thermal overload protection.
• Illuminated work area.
• Optical cut line indication.
Clamping
• Adjustable clamping pressure for the cutting of various type of material
• Regulation of the clamping presuure from the front panel
• Removable false clamp plate
Standard accessories
• Spare knife, 5 cutting sticks (each can be used up to 4 times), Full knife-change tool kit, operating manual, spare-parts catalogue, wiring diagram, hydraulic diagram, packing slip, CE declaration of conformity
Optional extras
• High speed steel knife.
• Cutting knives with 16 degrees to 30 degrees bevels.
• Wedge-profiled clamp plate.
• Alternative voltage.
Technical specifications
| Cutting width | 800mm |
| Knife traverse time during one cut cycle | 1,8 seconds |
| Front table length in front of knife | 650 mm |
| Maximum backgauge traverse | 815 mm |
| Table height from floor | 900 mm |
| Maximum pile height - with false clamp | 140 mm |
| - without false clamp | 145 mm |
| Minimum cut (without false clamp) | 20 mm |
| Pre-clamping (gauging) pressure max. | 300 N |
| Clamping pressure | 2000-30 000 N |
| Backgauge speed - micro-feed | 1 - 98% of fast-feed |
| - fast-feed | 300 mm.s-1 |
| Backgauge servomotor | 0,55 kW |
| Max. number of cutting steps per program | 250 |
| Max. number of cutting programs | 4x200 |
| Period of program storage after switch-off (min.) | 1 year |
| Measure display resolution | 0,01 mm |
| Power requirement | 3×400 V/4,5 kW |
| Gross weight (packed) | 1750 kg |
| Net weight | 1200 kg |
| Net weight Length/width/height | 2065×1610×1605 mm |
The machines are delivered from the factory in a wooden case with dimensions 2065mm x 1610mm x1605mm. They are packed dismantled into two main parts - The frame weight 850kg and the table weight 300kg . The gross weight ( packed ) is 1750 kg. Specifications are subject to change without prior notices.