New Machinery - Maxima MC 62 PH
The MAXIMA MC 62 PH paper cutter is the first product from a new range of hydraulic guillotines featuring an advanced overall design concept for increased efficiency of all critical components. For example, the power transmission for the cutting mechanism is via a linear hydraulic motor.
The machine is designed for cutting paper stacks of up to 620mm wide and 90mm high. The robust construction of the MAXIMA MC 62 PH, however, facilitates a wide variety of cutting applications, including paper, card, board, rubber, cork and similar materials up to a strength of 45N/mm over the full cutting length.
It is ideally suited for small commercial print houses, copy centres, in-plant printing departments, digital printers or large offices, but can also be satisfactorily deployed in the processing of rubber, veneer, metal or plastic foils, etc.
Standard Features
Safety features
• Positive mechanical locking of the knifebeam in the top rest position with cross-monitoring
• Automatic return of the knife from any position
• Twin push-button control of the cutting cycle with timed synchronisation (0.5s max.)
• 24v control circuits for clamp & knife operation, Backgauge drive and lighting
• Fixed guarding to all danger areas
• Low pressure pre-clamping/gauging system
• Rear table without lead-screw slot for Backgauge drive
• Fully compliant with European 'CE' safety requirements
Drive
• Hydraulic clamping and cutting operation with adjustable pressure control
• Backgauge drive via lead screw located adjacent to the right-hand side of rear table
• New design concept of the cutting mechanism
• Smooth, vibration free cutting
• High precision
• Quiet operation
• Overload protection
• stainless steel plated table
Knife
• Simple knife-change and adjustment from the front
• Knife protection during knife-change
• Cutting cycle counter
• Supplied with 2 high quality steel knives
Backgauge control system
• LCD display with 4 x 20 characters
• Direct setting of cutting coordinates
• Coordinate setting by +/- value
• Measure display in metric (mm) or imperial (")
• Manual control of the Backgauge traverse by electronic push-button in 0.1mm increments
• Memory capacity for 50 cutting programs with up to 1000 cutting steps
• Programming whilst cutting ('cut to mark') facility
• Easy selection and recall for regularly repeated cutting jobs
• Strip cutting feature, with or without intermediate cutting
• Simple program editing
• Material ejection ('Push-out') facility
• Fast backward and forward drive speeds
Electrical equipment
• 400V/50Hz 3 phase
• Mains isolator switch
• Hydraulic system motor switch
• Thermal overload protection
• Illuminated work area
• Optical cut line indication
Clamping
• Adjustable clamping pressure for cutting various types of material
• Removable false clamp plate
Standard accessories
• Spare knife, 5 cutting sticks (each can be used up to 4 times), Full knife-change tool kit, operating manual, spare-parts catalogue, wiring diagram, hydraulic diagram, packing slip, 'CE' declaration of conformity.
Optional extras
• Air cushion table
• High speed steel knife
• Cutting knives with 16 degrees to 30 degrees bevels
• Wedge-profiled clamp plate
• Alternative voltage
Basic technical specifications
| Cutting width | 620 mm (24.4") |
| Knife traverse time during one cut cycle | 1.8 seconds |
| Front table length in front of knife | 640 mm (25.2") |
| Maximum backgauge traverse | 640 mm (25.2") |
| Minimum cut | 18 mm (0.7") |
| Table height from floor | 900 mm (35.4") |
| Maximum pile height (with false clamp) | 90 mm (3.54") |
| Maximum pile height (without false clamp) | 95 mm (3.74") |
| Pre-clamping (gauging) pressure | 300 N |
| Clamping pressure | 2000 N - 24,000 N |
| Backgauge speed - micro-feed | 10 mm/sec. |
| - fast-feed | 130 mm/sec. |
| Backgauge drive motor (freq. converter) output | 0.55 KW |
| Max. number of cutting steps per program | 20 |
| Max. number of cutting programs | 50 |
| Period of program storage after switch-off (min) | 1 year |
| Measure display resolution | 0.01 mm |
| Power requirement | 3 x 400V/2.8 kW |
| Gross weight (packed) | 1580kg (3460LB) |
| Net weight | 1000kg (2190LB) |
| Length/width/height | 1821mm (71.7")x1320mm (52") x 1490mm (58.7") |
The machine is shipped fully assembled in case 245cm (96.5") x 157cm (62") x 185cm (73"). Specifications are subject to change without any prior notices.